Autonomous Business · Accounting, tax and reporting

Autonomous e-Ledger Management

Türkiye’s first autonomous e-Ledger application: Factorbooks autonomously runs the accounting system that makes an error-free e-Ledger possible.

e-Ledger and berat submission are part of the MOTUS, NEXUS and IMPERA packages. In NUCLEO, the e-Ledger process is handled by your financial advisor.

Overview

Factorbooks has been in use for two years at a customer operating in six different industries; this business’s e-Ledger is produced autonomously by Factorbooks and submitted to the Revenue Administration (GİB).

When the e-Ledger is produced at period end, errors only surface at that stage: negative balances, accounts running in the wrong direction, sub-accounts that do not agree with commercial records. Corrections, control files and resubmissions land on the accounting team’s busiest days.

In Factorbooks, checks run before any accounting entry exists, at the moment of the commercial or financial transaction, and a faulty transaction is stopped at the start.

The chart of accounts is not set up by hand in advance: each time a transaction is approved, the main and sub-accounts are opened autonomously, broken down to the same level of detail as the commercial and financial system.

The accounting entry is created as an exact copy of the commercial and financial record, and the e-Ledger is sent without errors. Commercial, financial and accounting records work as one body. The goal is not to produce an e-Ledger, but to run the accounting system that makes an error-free e-Ledger possible.

Autonomous e-Ledger Management

How it differs from other ERPs

The same work, done two different ways.

In other ERPs

  • The chart of accounts is opened by hand; its fit with the e-Ledger standard is checked at period end.
  • Matching between document types and accounts is set up and maintained by hand.
  • Negative balances and accounts running in the wrong direction show up while the e-Ledger is being prepared.
  • Accounting records are kept apart from commercial and financial records; differences are closed later through reconciliation.
  • After schematron errors, entries are corrected, a control file is prepared and submission is repeated.
  • Submission needs a financial seal and a local installation on the user’s own computer.

In Factorbooks

  • Each time a commercial or financial transaction is approved, the chart of accounts is opened autonomously; sub-accounts are broken down to the detail of the commercial and financial system, in line with the Uniform Chart of Accounts and the regulations.
  • Matching between GİB standard document types and accounts is done automatically.
  • Checks run at the moment of the commercial or financial transaction, and for back-dated transactions on every day from the transaction date to today; a transaction that would create a negative cumulative balance or reverse an account is never created.
  • The accounting entry is created as an exact copy of the commercial and financial record; no separate reconciliation is needed.
  • The e-Ledger is produced so that it passes schematron validation without errors.
  • The e-Ledger and berat are sent through the cloud; no financial seal is needed on your own computer.

How does a commercial transaction reach the e-Ledger?

The check happens in the transaction itself, not in accounting. The accounting entry is an exact reflection of the transaction.

  1. The transaction is entered

    A commercial or financial transaction such as a sale, purchase, collection or payment is entered and linked to the right GİB document type.

  2. It is checked on the spot

    Before any accounting entry exists, the daily cumulative balance and defined working direction of the related accounts are checked. The check does not look at today alone: for a back-dated transaction, every day from the transaction date to today is checked. A transaction that would create a negative balance or a reversed direction is not saved.

  3. The accounts are opened

    When the transaction is approved, the required main and sub-accounts are opened autonomously in line with the Uniform Chart of Accounts and the regulations. Sub-accounts are broken down to whatever level of detail the commercial and financial system holds.

  4. The accounting entry mirrors it

    The accounting entry of the approved transaction is created as an exact copy of the commercial and financial record. Balances agree on all three sides as of the related date.

  5. The e-Ledger is produced

    The required checks are run; the e-Ledger is produced so that it passes schematron validation without errors.

  6. It is sent and reported

    The e-Ledger and berat are sent to GİB through the cloud. Results are followed from a central list.

Autonomous control line

Commercial, financial and accounting records work as one body.

Checks run before any accounting entry exists, at the moment of the commercial or financial transaction. When the transaction is approved, the chart of accounts is opened autonomously, the accounting entry is an exact copy of the transaction and the e-Ledger is sent without errors.

Result:

The right chart of accountsComplete record integrityDaily autonomous checksMinimal manual interventionAn error-free e-Ledger process
Flow: when a commercial or financial transaction is entered, the cumulative balance and account direction are checked for every day from the transaction date to today before any accounting entry exists; a payment that would reverse the cash balance on a past date is blocked; when the transaction is approved, the chart of accounts is opened autonomously and sub-accounts are broken down to the detail of the commercial and financial system; the accounting entry is created as an exact copy of the commercial and financial record; the e-Ledger and berat that pass the schematron check are sent to GİB through the cloud and reported.

Which work runs autonomously?

You enter the record; Factorbooks does the work below for you.

Autonomous chart of accounts and matching

A chart of accounts that fits the regulations
Each time a commercial or financial transaction is approved, the main and sub accounting accounts are opened autonomously in line with the Uniform Chart of Accounts and the related regulations.
Sub-accounts as detailed as the business
Sub-accounts are broken down to whatever level of detail the commercial and financial system holds. There is no need to build the chart of accounts by hand in advance.
Accounts built to the e-Ledger standard
Accounts are structured to the e-Ledger standards and run autonomously.
Document type and account matching
Matching between GİB standard document types and accounting accounts is done automatically.
The right links
Accounting movements are linked to the right document type and accounts.

Record integrity and regulatory checks

Consistent with commercial and financial records
The detailed sub-account records sent to the e-Ledger are fully consistent with the commercial and financial records in Factorbooks.
Balances that match exactly
Balances in the commercial system, financial records and accounting accounts match exactly as of the related date.
Data integrity kept
Data integrity from commercial transactions through to accounting is kept autonomously.
One body
Commercial, financial and accounting records work as one body. The accounting entry is not entered separately; it is created as an exact copy of the commercial and financial record.
Checks before production
The required checks are run before the e-Ledger is produced.
Schematron validation
e-Ledgers are produced so that they pass schematron validation without errors.
No corrections afterwards
The need to prepare control files, complete missing entries or fix faulty entries afterwards disappears.

Errors are prevented before they happen

A preventive structure
The chart of accounts and account matchings are built to the regulations. Checks run before any accounting entry exists, at the moment of the commercial or financial transaction. The system does not allow a negative cumulative balance, nor any mismatch between commercial, financial and accounting records. Because a faulty record is stopped in the commercial or financial transaction, it never reaches accounting, and the e-Ledger process runs without errors.
Daily cumulative balance check
Daily cumulative balance checks are run for all main and sub-accounts before the transaction is saved.
Past and present together
The check does not look at today’s balance alone. When a back-dated transaction is entered, the cumulative balance and account direction are checked for every day from the transaction date to today.
No negative balance allowed
Commercial, financial and accounting movements are checked autonomously so that no negative cumulative balance can arise.
Account direction check
Accounts are not allowed to run against their defined working direction (debit/credit).
Movements that fit the account
Accounting movements are made in line with the nature and working rules of each account.
Stopped at the source
Negative cumulative balances, accounts running in the wrong direction and the faulty records they could cause are stopped in the commercial or financial transaction; no faulty entry ever reaches accounting.

What it delivers

  • Accounting errors caused by negative cumulative balances are prevented before they happen.
  • The need for later error detection, entry corrections and e-Ledger checks disappears.

Cloud submission and reporting

Produced and sent in the cloud
e-Ledgers and berats are produced in the cloud and sent to GİB.
No local financial seal
The submission infrastructure does not require a financial seal on the user’s own computer.
Quick submission
Submissions are completed in a very short time.
Central list
Produced e-Ledgers and berats are listed centrally.
Period and detail reports
Reporting is available by period and in detail.
Submission tracking
Submission processes and their results are easy to follow.

What it gives your business

  • Errors are prevented before they happenThe chart of accounts and matchings are built to the regulations. Negative cumulative balances and mismatches between commercial, financial and accounting records are not allowed; a faulty entry is stopped before it is created.
  • Full reconciliation of commercial and accounting recordsCommercial transactions, financial records and accounting balances are managed within the same data integrity. The need for manual reconciliation and account checks drops considerably.
  • Less accounting workloadOpening accounts, matching, daily checks and e-Ledger preparation are done automatically. The team spends less time on manual work and checks.
  • Faster e-Ledger processesNo time is lost at the last stage on corrections, control files and resubmissions. e-Ledger and berat processes finish in much less time.
  • Stronger compliance and reliabilityThe chart of accounts, document types, account matchings and e-Ledger checks are managed to the related regulations and technical standards. Ongoing compliance is supported.
  • Easier infrastructure and operationsProducing and sending in the cloud reduces operational dependencies on a local computer, installation and financial seal use.
  • Continuous control and traceabilitye-Ledgers, berats and submission results are followed centrally. The accuracy of entries and the status of processes are tracked more transparently.

The Factorbooks approach

Factorbooks treats the e-Ledger not just as a file to create and send to GİB, but as an autonomous process managed across the whole accounting system. The e-Ledger is not an output produced at the end of accounting; it is the natural result of a well-managed accounting system. Factorbooks does not try to check the accuracy of entries at the moment the e-Ledger is produced. It runs the checks at the moment of the commercial or financial transaction, stops a faulty transaction at the start and creates the accounting entry as an exact copy of it. Commercial, financial and accounting records work as one body. The right chart of accounts, complete record integrity, daily autonomous checks, minimal manual intervention and an error-free e-Ledger process.

Proven in the field

Türkiye’s first autonomous e-Ledger application

Factorbooks has been in use for two years at a customer operating in six different industries; this business’s e-Ledger is produced autonomously by Factorbooks and submitted to the Revenue Administration (GİB).

Modules where this runs

The autonomous process described here runs inside the catalog modules below.

Frequently asked questions

Does Factorbooks produce the e-Ledger, or the financial advisor?

In the MOTUS, NEXUS and IMPERA packages, the e-Ledger and berat are produced in Factorbooks and sent to GİB through the cloud. In NUCLEO, the e-Ledger process is handled by your financial advisor.

Is a financial seal needed for submission?

The user does not need a financial seal on their own computer. The e-Ledger and berat are produced and sent through the cloud.

How are negative balances and reversed accounts prevented?

Checks run before any accounting entry exists, at the moment of the commercial or financial transaction. The daily cumulative balance and direction of every main and sub-account are checked; for back-dated transactions this covers every day from the transaction date to today. A transaction that would create a negative cumulative balance or a reversed direction is not saved.

Can the accounting entry differ from the commercial record?

No. The accounting entry is not entered separately; it is created as an exact copy of the commercial and financial record. Commercial, financial and accounting records work as one body, and balances agree as of the related date.

Do we need to set up the chart of accounts in advance?

No. Each time a commercial or financial transaction is approved, the required main and sub-accounts are opened autonomously, broken down to whatever level of detail the commercial and financial system holds.

What if we get a schematron error?

The required checks are run before the e-Ledger is produced, and the ledger is produced to pass schematron validation without errors. The need for control files and later corrections disappears.

Other autonomous modules

All autonomous modules

See it with your own data

We will set the scope and the package together, based on your transaction volume.

Get in touch with Factorbooks

If you are evaluating Factorbooks or would like more information, fill in the form and we will route your request to the right team.

  1. 1Contact details
  2. 2Request details

Please enter your first and last name.

Please enter a valid email address.

Please enter your company name.